Search
Close this search box.
Search
Close this search box.

Rotary Barrel Machine

Products Features

Rotary Barrel Type Sand Blasting Machine designed for Sand Blast Cleaning of small or medium size iron, steel, alloy and non-ferrous castings, forgings, heat treated parts, pressings and Fabrications at the lowest possible cost.

  • Capacity : 100/150 kgs load 1.5/3 cft effective volume. The cleaning rate depends on nature of job, degree of surface preparation required and type of abrasive used.
  • Blast Wheel : The most effective abrasive throwing unit fitted capable of projecting optimum quantity of abrasive per horse power.
  • Low Maintainence : adipiscing normal valve seats
  • Design : Through tumbling action of the barrel and slow speed rotation of barrel, the protection of delicate casting is ensured.
  • Controls : All controls are centrally located on the machine itself. All necessary safety features are provided.
  • Timer : The machine can be pre-set for blasting cycle by Electronic Timer.

Specification

DescriptionModel RBF-1Model RBF-2
Flow Rate of Wheel (Kg./Hr.)11356000
Barrel Size (mm)575 x 625 Length900 x 950Length
Barrel Capacity (Kg.)100150
Barrel Effective Volume (cft)1.53
Barrel RPM5-75-7
Loading Height (mm)370370
Type of Dust CollectorFabric BagFabric Bag
Dust Collector Capacity (cfm)4001200
Hp of Dust Collector13
Total Power Requirement (HP)515
Initial Charge of Abrasive (Kg.)35200
Abrasive Blast Cleaning Cycle15-20 Min. for Cast Iron15-20 Min. for Cast Iron
   
Dimension of Machine with Dust Collector  
Length(mm)21002800
Width(mm)17002850
Height(mm)21003200
   
Dimension of Dust Collector  
Length(mm)900800
Width(mm)7001200
Height(mm)21002400
Floor Space required for Machine with Dust Collector  
Length(mm)34002600
Width(mm)25003800