Cleaning / Heat Scale Removal
Batch Operation
Cleaning / Heat Scale and Rust Removal.
Batch Operation
SURFEX® designs and manufactures the Y- Conveyor Type Spinner Hanger Shot Blasting Machine for a wide range of components (Castings / Fabricated / Forging / Aluminum Die Castings / Agriculture Components / etc.).
The machine consists of Total 2 No’s of Stations. The Trolleys (2 Set – one on each station) are mounted on the overhead Y- conveyor system to hold the jobs. The jobs to be shot blasted are loaded on these stations and one by one moved inside the blasting chamber for blasting purpose automatically. Suitable number of blast wheel stations are located (at one side of cabinet) strategically around the cabinet, which fires blasting abrasive media on the rotating job/ hanger that contain jobs. After the blast cleaning cycle is over, the blast wheel is shut off and trolley moves out automatically for unloading of component and the process is repeated.
SURFEX® equipment includes a fully automatic Dust Collection System to remove dust and fines from the blast cabinet.
Cleaning / Heat Scale Removal
Batch Operation
Cleaning / Heat Scale and Rust Removal.
Continuous Operation
SURFEX® designs and manufactures the Overhead Close Loop Conveyor Type Spinner Hanger Shot Blasting Machine (with Chain Conveyor) for a wide range of components (Castings / Fabricated / Forging / Aluminum Die Castings / Agriculture Components / etc.).
The machine consists of multiple sets (as required) of job conveying stations to hold the jobs. The jobs to be shot blasted are loaded on these stations and taken one by one inside the blasting chamber for blasting purpose automatically. Suitable numbers of blast wheel stations are located strategically around the cabinet, which fires blasting abrasive media on the rotating job/ hanger that contain jobs. After the blast cleaning cycle is over, the blast wheel is shut off and trolley moves out automatically for unloading of component and the process is repeated.
SURFEX® equipment includes a fully automatic Dust Collection System to remove dust and fines from the blast cabinet.
Cleaning / Heat Scale Removal
Continuous Operation
SURFEX® designs and manufactures the Overhead Close Loop Conveyor Type Pass Through Shot Blasting Machine (with Chain Conveyor) for a wide range of components (Castings / Fabricated / Forging / Aluminum Die Castings / Agriculture Components / etc.) and for Structural Cleaning.
The machine consists of multiple sets (as required) of job conveying stations to hold the jobs. The jobs to be shot blasted are loaded on these stations and taken one after another (with suitable gap) inside the blasting chamber (on continuous basis) for blasting purpose automatically. Suitable numbers of blast wheel stations (suitable number on one side and also on opposite side for continuous pass through shot blasting operation) are located strategically around the cabinet, which fires blasting abrasive media on the jobs. After the blast cycle is over, the job conveying station moves (with blasted job) out automatically for unloading of component and the process is repeated continuously.
SURFEX® equipment includes a fully automatic Dust Collection System to remove dust and fines from the blast cabinet.
Cleaning / Heat Scale and Rust Removal.
Continuous Operation
SURFEX® designs and manufactures the Indexing Hanger Type Shot Blasting Machine for a wide range of components (Castings / Forging / Aluminum Die Castings / etc.).
The machine consists of suitable number job stations (2 No’s / 4 No’s) with indexing hanger. The job is load (placed) manually on the job fixture (hangers) of the respective station of the main indexing turn table by the operator at the loading / un-loading station. Then the station (with loaded hanger) is indexed into the blasting chamber for shot blasting purpose. Suitable numbers of blast wheel stations are located strategically around the cabinet, which fires abrasives on the rotating jobs. After the blast cycle is over, the station (with blasted jobs) is indexed for unloading and simultaneously another station containing the new jobs index into the blasting chamber thus makes the process continuous.
When one station (with jobs) is under the blasting operation in blasting chamber, simultaneously at loading/ un-loading station the operator will un-load the blasted jobs and load the new jobs manually.
SURFEX® equipment includes a fully automatic Dust Collection System to remove dust and fines from the blast cabinet.
SURFEX® designs and manufactures the Hanger Type Shot Blasting Machine for castings, forgings, fabricated components and aluminium die castings suspended on hangers or trolleys. Y-track, monorail and overhead close-loop conveyor configurations move jobs into an enclosed blast chamber for uniform, all-around cleaning, with continuous and airless variants available for heavy-duty production.
A Hanger Type Shot Blasting Machine is a batch or continuous surface-preparation system in which components are suspended from hangers or trolleys and carried on an overhead conveyor into an enclosed blast chamber. Suitable numbers of blast wheel stations, positioned strategically around the cabinet, fire abrasive media onto the rotating job as it hangs, giving even, all-around coverage without the component needing to sit on a fixed base.
This hanging arrangement is what makes a Hanger Shot Blasting Machine particularly effective for castings, forgings, fabricated parts and aluminium die castings with irregular shapes, undercuts or delicate features that would be difficult to fixture reliably on a table or roller bed. Because the job rotates freely on the hanger while blast wheels fire from multiple angles, coverage reaches recesses and contours that a flat-mounted component would partially shield from the media stream.
SURFEX® builds six distinct hanger configurations — Door Hanger, Y-track Spinner, I-track Spinner, Overhead Close Loop Spinner, Overhead Close Loop Pass Through, and Indexing Hanger — so foundries and fabrication shops can select the arrangement that matches their job size, batch pattern and required throughput.
Expand each configuration to see how it moves jobs through the blast chamber.
Components such as castings, fabrications, forgings and aluminium die castings are hung on a fixed hanger inside a door-style blast cabinet. This entry-level Hanger Type Shot Blasting Machine is well suited to lower-volume batches and mixed component ranges where a full conveyor system is not yet justified.
The Y-Conveyor Type Spinner Hanger Shot Blasting Machine uses two loading stations mounted on an overhead Y-shaped conveyor. Jobs are loaded on one trolley while the other is blasted, and blast wheel stations fire media onto the rotating hanger. Once the cycle finishes, the trolley automatically moves out for unloading while the next station indexes in, keeping the Y-track layout efficient for medium-batch runs.
The I-Conveyor Type Spinner Hanger Shot Blasting Machine follows the same rotating-hanger blast principle as the Y-track version, but on a straight-line overhead conveyor path, suiting facilities where floor layout favours an inline arrangement over a Y-shaped junction.
A true Monorail Hanger Shot Blasting Machine, this configuration runs a chain-driven closed-loop overhead conveyor carrying multiple job-conveying stations in sequence. As an Overhead Hanger Shot Blasting Machine, it suits higher job counts than the Y or I-track versions, indexing each station into the blast chamber automatically before moving on to unloading.
This is SURFEX®'s Continuous Hanger Shot Blasting Machine: job-conveying stations enter the blast chamber one after another with a suitable gap, on a truly continuous basis, with blast wheel stations positioned on both sides of the cabinet for simultaneous two-sided blasting. It is also used for structural component cleaning where sustained, uninterrupted throughput matters most.
Jobs are loaded manually onto 2 or 4 hanger stations on a main indexing turn table. Each loaded station indexes into the blast chamber for cleaning while the operator simultaneously unloads and reloads the opposite station, making the Indexing Hanger Type Shot Blasting Machine an efficient middle ground between manual and fully automatic hanger systems.
Every conveyorised configuration in the SURFEX® range qualifies as an Automatic Hanger Shot Blasting Machine: once a job is loaded, indexing, blasting, dust extraction and unloading proceed without further operator intervention until the next load cycle. This automation is what allows a single operator to run multiple stations across a shift rather than supervising one manual blast cycle at a time.
For foundries running large, dense castings or continuous multi-shift production, a Heavy Duty Hanger Shot Blasting Machine is built with reinforced hanger arms, higher-torque conveyor drives and larger-capacity blast wheels to sustain the extra load and cycle frequency without premature wear. This is also where an Industrial Hanger Shot Blasting Machine earns its keep: consistent surface preparation across thousands of cycles, not just a handful of prototype parts.
SURFEX® equips every hanger configuration with a fully automatic dust collection system to remove dust and fines from the blast cabinet, keeping visibility and abrasive quality consistent regardless of which configuration is running.
For foundries seeking lower operating cost and higher abrasive throw energy, SURFEX® offers a Hanger Type Airless Shot Blasting Machine configuration using turbine-driven blast wheels in place of compressed-air nozzles. Removing the compressor from the process significantly reduces energy consumption per tonne of components processed, which matters most on heavy-duty, high-volume hanger lines.
The airless hanger configuration follows the same suspended-job, rotating-hanger principle as the air-operated versions, so the choice between airless and air-operated comes down to production volume, media type and the energy infrastructure already available on the shop floor. Our team compares both options against your component mix before recommending a configuration. For related airless equipment, see our Airless Plate Shot Blasting Machine and Rotating Turn Table cum Hanger Type Machine.
Sand and investment castings hung and rotated for full-surface scale and sand residue removal.
Forged components cleaned of heat scale and oxide layers ahead of machining or finishing.
Welded assemblies suspended on hangers for even coverage across joints and irregular surfaces.
Lighter alloy components processed with adjusted media and intensity to avoid surface damage.
Tractor and implement parts cleaned before painting or powder coating in high-volume batches.
Engine housings, brackets and drivetrain castings prepared for coating or inspection.
Precision-machined structural parts cleaned to a consistent surface profile.
The pass-through configuration additionally supports structural component cleaning at scale.
| Feature | Function |
|---|---|
| Blast Wheel Stations | Strategically positioned around the cabinet for all-around coverage |
| Hanger / Trolley System | Suspends and rotates jobs for uniform blast exposure |
| Conveyor Options | Y-track, I-track, closed-loop monorail or indexing turn table |
| Operation Mode | Batch (Door, Indexing) or continuous (Spinner, Pass Through) |
| Dust Collection | Fully automatic system removing dust and fines from the cabinet |
| Media Options | Air-operated nozzle or airless turbine-driven blast wheels |
SURFEX® is a Hanger Type Shot Blasting Machine manufacturer trusted by foundries, forge shops and fabrication facilities.
Continuous engineering of shot blasting equipment since 1977 from our Jodhpur manufacturing base.
ISO 9001:2015 and ISO 14001:2015 certified quality systems, see our certifications page.
Door, Y-track, I-track, monorail, pass-through and indexing hanger systems engineered in-house.
A proven installation base across India, the Middle East, Africa, Europe and Asia-Pacific.
Both media delivery methods engineered in-house, recommended on application, not availability.
Installation, operator training, annual maintenance and genuine spare-parts inventory for prompt dispatch.
The Hanger Type Shot Blasting Machine sits alongside a wider SURFEX® blasting and peening portfolio.
It is used for cleaning, heat-scale and rust removal on castings, forgings, fabricated parts and aluminium die castings that are suspended on hangers or trolleys and moved into an enclosed blast chamber for treatment.
A Y-track machine uses a Y-shaped overhead conveyor with two loading stations feeding into one blast chamber, while a monorail or overhead hanger machine uses a single closed-loop rail carrying multiple stations in sequence for continuous processing.
Yes, the Overhead Close Loop Conveyor Type Pass Through configuration is a Continuous Hanger Shot Blasting Machine that indexes job stations through the blast chamber one after another without stopping the line.
Yes, SURFEX® offers a Hanger Type Airless Shot Blasting Machine configuration using turbine-driven blast wheels instead of compressed-air nozzles, giving higher throughput for heavy-duty applications.
SURFEX® is a Hanger Type Shot Blasting Machine manufacturer based in Jodhpur, India, engineering shot blasting equipment since 1977 under ISO 9001 and ISO 14001 certification.
Castings, fabricated components, forgings, aluminium die castings and agricultural components are commonly processed, since the hanger system suspends irregularly shaped parts securely for even blast coverage.
Share your component shape, batch size and required throughput, and our engineering team will recommend the right hanger configuration — Y-track, monorail, pass-through or indexing — for your production line.
