Roller Conveyor Type Blasting mc

The machine will be based on Induction Suction blasting principle. In this Machine, Roller conveyor type work conveyor is provided, job to be blasted are placed manually on this Roller conveyor and taken inside the blasting cabinet & Top side is blasted in 1st Chamber where 4 Nos. of guns are located. then job will move in 2nd chamber where another 4 Nos. of guns are located in bottom so that job will get blast from bottom side also.

The machine consists of Blasting Chamber fabricated construction from M.S. sheet. It will have vestibules & rubber curtain type opening at both side of the cabinet, Two Horizontal Nozzle Reciprocation System, One Roller Conveyor System, Abrasive Recovery unit, Multi Cyclone Separator with Cartridge Type Dust Collector.

When the job is placed on the roller conveyor, they passes through the blast cabinet, there are 2 chambers, in 1st the horizontal nozzle reciprocation arrangement will shot blast the job automatically and uniformly clean them from upper portion. In 2nd the horizontal nozzle reciprocation arrangement will shot blast the job automatically and uniformly clean them from bottom side. After shot blasting, set of Air wash nozzles are located which air blow on all surfaces, removing the dust & clean the component from top & bottom side.

The abrasive from the roller conveyor will collected in the hopper placed under the cabinet. The abrasive stored in the bottom storage hopper will be sucked inside the reclaimer by the suction draft created by the Vacuums suction. The cyclonic action inside the reclaimer separates the dust and abrasive. The separated abrasive passed to screen, where coarse particles and debris are separated. The usable abrasive gets stored in storage tank.

From the storage tank the abrasive will be distributed to the for recycling, A Sufficient Capacity of cartridge type of Dust collector is incorporated to suck the dust produced in the blast chamber and keep the chamber and environment clean.