Suction Blaster is the simplest and most effective way to remove corrosion and old paint. Suction Blaster is a clean, dust free sand blaster that leaves the surface cleaned and well prepared for painting, filling etc. When the cabinet and power module are correctly set-up, the cabinet is ready for operation by actuation of the foot pedal. Fully depressing the foot pedal causes air to flow through the blast gun. Air moving through the gun draws media into the blast gun mixing chamber. The media mixes with the air and is propelled out the nozzle. After striking the object being blasted, the blast media, along with fines, dust, and byproducts generated by blasting, fall through the grate into the cabinet hopper. These particles are drawn into the reclaimer for separation. Dust and fines are first separated from the reusable blast media. Next the media is screened of oversize particles, and returned to the reclaimer hopper for reuse. Dust and fines are drawn from the reclaimer into the dust collector which traps the dust, discharging clean air. When the foot pedal is released the blasting stops.
SAND BLASTING MACHINE EIGHT NOZZLE TYPE
Surface Finishing Equipment Co. have introduced machine for removal of oxidation layer and etching outer surface of galvanized sections of various sizes. The machine houses 8 to 10 Nos. of Nozzles which are reciprocated horizontly and cover entire circumsference of Section. The Section are loaded on Conveyor system of machine and passes through Blasting chamber for cleaning purpose. The Machine is capable of Sand/Shot Blasting any media like Steel Shots, Steel Grit, C.I. Grit, Aluminium Oxide and many more. Mahine is equipped with media Reclaiming System so that only required size of media is circulated. Entire machine is ventilated by powerful Dust Collector. Machine is suitable for cleaning, etching and for obtaining different roughness (Ra) value on surface of section as per customer’s requirement.