Innovate to Satisfy Customers

Shotcrete & Guniting Machines

Shotcrete & Guniting Machines

Application for our Guniting & Shotcrete machines is mainly on undermentioned applications:

1.        Concrete Repair (Bridge Repair, Infrastructure Repair, Etc)
2.        Rockscapes
3.        Artificial Rocks
4.        Retaining Walls
5.        Panel Building Systems
6.        Zoos
7.        Slope Stabilization
8.        Refractory Spraying
9.        Concrete Domes
10.       Mine and Tunnel Support and Walls
11.       Swimming Pools
12.       Straw Bale Construction
13.       Water Parks
14.       Skateboard Parks
15.       Repairing and rebuilding civil structures.
16.       Water Proofing etc.

1. Roter Type Shotcrete Machine :

The machine works on a dry mix principle. The material is duly filled into the feeding hopper from where it falls into the chamber of revolving rotor. The mix is then transported in a continuous process to the air chamber, from there it is blown by the compressed air stream through the hose to the spraying nozzle, and to the application area respectively. Water is added to the dry concrete in the nozzle at the end of the conveying hose pipe. The machine is driven by electric motor.

Specifications:

Dimension
Length Approx 1450mm
Width Approx 750mm
Filling Height Approx 1720mm
Drive
Motor 415 Volts 3 Phase, 50 Cycle AC
Capacity 10HO, 1440 rpm
Conveying Capacity 4 to 5 M³ Per Hour
Conveying Hose Pipe Dia Capacity 63mm
Maximum Aggregate Size 12mm
Compressed Air Requirement 8-10 M³ / minute
Water Dosage:
Water Pressure 6 bar
Size of Water Hose ¾” I.D
Conveying Capacity
Length Horizontal 100 meters
Height Vertical 50 meters

2. Pneumatic Guniting & Shotcrete Machine:

Surfex Pneumatic Guniting Machine meets the high demand in building and construction industry by providing specialised concrete spraying technique. They are equally suitable for refractory lining work in foundries, power plant, refineries and steel industry.

Model D3 Basic Conversion D6 Basic Conversion D-6S Basic Conversoin S6
Nozzle Size (mm) 12 – 19 19 – 25 38 – 50 19
Internal Dia of Gunting hose (mm) 25 – 32 32 – 38 50 – 60 32
Compressed air required at 6kg/cm2 M3/Min 7.00 – 9.00 9.00 – 10.4 17.0 – 21.50 9.0
Maximum aggregate size (mm) 6 – 10 10 – 12 20 – 25 10
Discharge (cbm/h) 1 – 1.15 1.5 – 2 4 5
Chamber Capacity (M3) 0.085 .017 .017 .017
Overall Dimensions (Approx in mm) (WxDxH) 650x900x1250 800x1150x1550 800x1150x1550 800x1150x1000
Weight (Approx in Kgs.) 400 550 550 450

Our Client

  • Our Client
  • Our Client
  • Our Client
  • Our Client
  • Our Client
  • Our Client
  • Our Client
  • Our Client
  • Our Client
  • Our Client
  • Our Client
  • Our Client
  • Our Client
  • Our Client
  • Our Client
  • Our Client
  • Our Client
  • Our Client
  • Our Client
  • Our Client
  • Our Client
  • Our Client
  • Our Client
  • Our Client
  • Our Client
  • Our Client
  • Our Client
  • Our Client
  • Our Client
  • Our Client
  • Our Client