Rotary Barrel Type
Rotary Barrel Type Sand Blasting Machine designed for Sand Blast Cleaning of small or medium size iron, steel, alloy and non-ferrous castings, forgings, heat treated parts, pressings and Fabrications at the lowest possible cost.
100/150 kgs load 1.5/3 cft effective volume. The cleaning rate depends on nature of job, degree of surface preparation required and type of abrasive used.
Blast Wheel :
The most effective abrasive throwing unit fitted capable of projecting optimum quantity of abrasive per horse power.
Low Maintainence :
Rugged and sturdy overall construction of machine ensure minimum operational and maintenance cost, where vulnerable components are lined with wear resistant materials.
Through tumbling action of the barrel and slow speed rotation of barrel, the protection of delicate casting is ensured.
All controls are centrally located on the machine itself. All necessary safety features are provided.
The machine can be pre-set for blasting cycle by Electronic Timer.
|Description||Model RBF-1||Model RBF-2|
|Flow Rate of Wheel (Kg./Hr.)||1135||6000|
|Barrel Size (mm)||575 x 625 Length||900 x 950Length|
|Barrel Capacity (Kg.)||100||150|
|Barrel Effective Volume (cft)||1.5||3|
|Loading Height (mm)||370||370|
|Type of Dust Collector||Fabric Bag||Fabric Bag|
|Dust Collector Capacity (cfm)||400||1200|
|Hp of Dust Collector||1||3|
|Total Power Requirement (HP)||5||15|
|Initial Charge of Abrasive (Kg.)||35||200|
|Abrasive Blast Cleaning Cycle||15-20 Min. for Cast Iron||15-20 Min. for Cast Iron|
|Dimension of Machine with Dust Collector|
|Dimension of Dust Collector|
|Floor Space required for Machine with Dust Collector|