Innovate to Satisfy Customers

New_developments

Wet Blaster Indexing Type
Surface preparation is key consideration for manufacturing and engineering sector, it may be for aesthetic reasons or to increase product performance or basic material enhancement. This machine is continuous operating type and have Multi Nozzle for Wet blasting purpose.
Wet-Blaster-Indexing-Type--1373362888
Plate Preservation Line
Surfex introduce marine industries by providing inline Surface Treatment Systems (STS) in preservation Line, which removes contaminants, profiles the surface & coats the primary paint on blasted surface immediately after blasting operation without much loss of time, which will not allow any chances of oxidation of the ferrous plate generates high safety factor of corrosion protection against sea high humidified & salty weather.
Plate-Preservation-Line-1373364649
Scrapper Type Blast Room
Surfex introduce the scrapper type blast room. The job is placed inside the blast room and the blasting operation is carried out by operator manually. Used abrasive falls down into the scrapper unit from where it is conveyed by longitudinal scraper conveyors to cross scrapper conveyor
Scrapper-type-blast-room-1373365639
Rod/pipe/tube Cleaning Machine
Surfex Launched Hi-speed rod/pipe/tube cleaning machine The advantage of rod bar cleaning machine are cleaning, brighter finish, uniform and polished. It saves labor and improves productivity..
Rodpipetube-Cleaning-Machine-1373430803
Shot Peening Machine For Rod
Shot Peening Machine for Rod : This machine, is continuously operating type, in which Rods are fed through diabola into machine. The rotating rods are shot peened to required intensity and come out from outlet portion. All shot peening parameters are monitoredin the machine to achieve desired results. Machine is equipped with Shot Classifier, Shot Velocity Controller, Shot Quantity Controller, Shot Direction Controller etc.
Shot-peening-machine-for-rod-1373448615
Tyre Mould Cleaning Machine
Surface Finishing Equipment Co. have introduced Shot Blasting Machine for Tyre Mold Cleaning Application. The machine consist of Blast Chamber with Turn Table & Abrasive Recovery Unit & Dust Collector,4 Nos. of Suction Blast Nozzle and its Reciprocation Arrangement.
Tyre-Mould-Cleaning-Machine-1373431094
Direct Drive Blast Wheel
New Blast Wheel with direct or indirect drive system is provided. Wheel assembly constitutes various liners manufactured out of the best alloy steel for optimum life. The per horse power abrasive throwing capacity is optimal & maintenance assembly is operators friendly.
Direct-Drive-Blast-Wheel-1373431249
Pneumatic Special Purpose Machine
The machine is fully automatic Rotary continuous satellite table air operated blast machine consist of Cabinet enclosure, rotary turntable having 12 rotary satellites, suction blast gun in 2 group, one automatic blow off gun, abrasive reclaimer separator, cartridge type dust collector and PLC operated control panel.
Pneumatic-Special-Purpose-Machine-1373431359
Robotic Shot Peening Machine
Surfex Introduce the shot peening process is based on the effect of introducing compressive stresses in the surface of a metal part by controlled impinging with spherical particles. By this the resistance against fatigue will be increased and therefore also the life of a part.
Robotic-shot-peening-machine-1373431504
New Portable Abrasive Blaster Range
Surfex introduce New Portable Abrasive Blaster Range
New-Portable-Abrasive-Blaster-Range-1421392875

Our Client

  • Our Client
  • Our Client
  • Our Client
  • Our Client
  • Our Client
  • Our Client
  • Our Client
  • Our Client
  • Our Client
  • Our Client
  • Our Client
  • Our Client
  • Our Client
  • Our Client
  • Our Client
  • Our Client
  • Our Client
  • Our Client
  • Our Client
  • Our Client
  • Our Client
  • Our Client
  • Our Client
  • Our Client
  • Our Client
  • Our Client
  • Our Client
  • Our Client
  • Our Client
  • Our Client
  • Our Client