Machine For Cleaning Of Earth Moving Component
`SURFEX` Airless Shot Blasting Machine Design for Cleaning of Earth Moving Component Industry
The components are loaded on monorail type overhead hanger of the machine. A set of motorized hangers is used for proper hanging of these components. The motorized trolley enters into the inlet of the machine and reach into work cabinet where 14 Nos. of blast wheel are stationed which fire abrasive on the forward moving components. The job is squarely shot blasted and cleaned and the job is taken out through outlet vestibules. Outside the outlet vestibule job enters into blow off chamber where 2 nos of powerful blower guns are also located, which blows air at high velocity so that shots etc (manually) lying on component is removed, from there component moves into painting chamber.
Down Draft Type Paint Spray Booth Model No. PB-904540
The down draft type paint spray booth is suitable for any type of Air-less and Electrostatic painting. The system consists of painting booth enclosure, air intake filter, Filter channels for paint trap, air exhaust system, complete with electric motor, outlet duct, canopy etc. The fresh air enters into the system from the top of the booth passing through 2 stage filters. This allows air to flow vertically downward thereby washing the operator and the job for better visibility to the operator. Simultaneously the exhaust air system sucks the suspended paint particles and fumes from the booth. These suspended paint particles gets trapped in the filter channels which are provided at the floor.
- Maintains clean air at the operators breathing level and prevents spreading of paint particles.
- Downward air flow directs the over spray and fumes over the paint trap filter channel and clean air is exhausted in the atmosphere.
- Reduces the fire hazard