Hr Coils & Strips Cleaning Machine
This machine consists of two Blast Wheel Stations placed strategically to cover upper and bottom surface of the job. Blast Wheel is direct driven single plate and bi directional driven by suitable HP Electric Motor with VFD Controller. The Machine consists of Bucket Elevator, Abrasive Cleaning System, air Wash Media Separator, Dust Collector & Control Panel etc. The Blast Chamber is fully lined with Mn. Steel Sheet to prevent abrasion. Head of Coil Strips coming from the Decoiler Machine or Coil straightening. Machine is inserted into Shot Blast Machine at inlet side and hooked to Coiler Arrangement at Outlet side and driven accordingly at the set speed. Coil passes through Blast Chamber for Blast cleaning purpose. 2 Nos. of Blast Wheel Stations fire shot on Coils/Strips and clean them in single pass. The Guide Rollers are provided inside Blast Cabinet and at suitable interval for easy movement of Coils throughout length. Guide Pinch Rollers are also provided at inlet and outlet alongwith manually adjustable side Guide Rollers & inlet and outlet. Dust and fines from Blast Chamber is swept and carried into Dust Collector and only clean air is discharged into atmosphere keeping the environment clean. The Variable Speed Driveis provided for controlling speed of Blast Wheel Station as per requirement.. The Air Blow Off at outlet portion is provided for removing dust particles from coil coming out from Blast Cabinet.