Blast Room With Full Floor Scrapper Recovery System
“SURFEX” Blast Room with Full Floor Scrapper Recovery System
MODEL: BRSMR-1206060 for Weighing Systems
The job is placed inside the blast room and the blasting operation is carried out by operator manually. Used abrasive falls down into the scrapper unit from where it is conveyed by longitudinal scraper conveyors to cross scrapper conveyor. The cross scrapper conveyor conveys the abrasive media into boot of bucket elevator. The bucket elevator lifts the media and pours into media separation unit from where the reusable abrasive goes into the Portable Abrasive Blaster and Abrasive is recycled through blast nozzle. The unusable abrasive from the media separator unit is collected in a bin [Buyer to arrange bin].
The dust and fines from room is sucked and is carried into the pulse jet Dust Collector and clean air is discharged into atmosphere, keeping the environment clean and friendly.
Semi Down Type Paint Spray Booth Model No-PB-1206060
The Semi down draft type paint spray booth is suitable for any type of Air-less and Electrostatic painting. The system consists of painting booth enclosure, air intake filter, Filter channels for paint trap, air exhaust system, complete with electric motor, outlet duct, canopy etc. The fresh air enters into the system from the top of the booth passing through 2 stage filters. This allows air to flow vertically downward thereby washing the operator and the job for better visibility to the operator. Simultaneously the exhaust air system sucks the suspended paint particles and fumes from the booth. These suspended paint particles gets trapped in the filter channels which are provided on the bottom side of the wall.
- Maintains clean air at the operators breathing level and prevents spreading of paint particles.
- Semi Downward air flow directs the over spray and fumes over the paint trap filter channel and clean air is exhausted in the atmosphere.
- Reduces the fire hazard